puppet nftables

# @summary Bridged network configuration for qemu/libvirt

#

# This class configures the typical firewall setup that libvirt

# creates. Depending on your requirements you can switch on and off

# several aspects, for instance if you don't do DHCP to your guests

# you can disable the rules that accept DHCP traffic on the host or if

# you don't want your guests to talk to hosts outside you can disable

# forwarding and/or masquerading for IPv4 traffic.

#

# @param interface

#   Interface name used by the bridge.

#

# @param network_v4

#   The IPv4 network prefix used in the virtual network.

#

# @param network_v6

#   The IPv6 network prefix used in the virtual network.

#

# @param dns

#   Allow DNS traffic from the guests to the host.

#

# @param dhcpv4

#   Allow DHCPv4 traffic from the guests to the host.

#

# @param forward_traffic

#   Allow forwarded traffic (out all, in related/established)

#   generated by the virtual network.

#

# @param internal_traffic

#   Allow guests in the virtual network to talk to each other.

#

# @param masquerade

#   Do NAT masquerade on all IPv4 traffic generated by guests

#   to external networks.

class nftables::rules::qemu (

  String[1]                               $interface         = 'virbr0',

  Stdlib::IP::Address::V4::CIDR           $network_v4        = '192.168.122.0/24',

  Optional[Stdlib::IP::Address::V6::CIDR] $network_v6        = undef,

  Boolean                                 $dns               = true,

  Boolean                                 $dhcpv4            = true,

  Boolean                                 $forward_traffic   = true,

  Boolean                                 $internal_traffic  = true,

  Boolean                                 $masquerade        = true,

) {

  if $dns {

    nftables::rule {

      'default_in-qemu_udp_dns':

        content => "iifname \"${interface}\" udp dport 53 accept";

      'default_in-qemu_tcp_dns':

        content => "iifname \"${interface}\" tcp dport 53 accept";

    }

  }

  if $dhcpv4 {

    nftables::rule {

      'default_in-qemu_dhcpv4':

        content => "iifname \"${interface}\" meta l4proto udp udp dport 67 accept";

      # The rule below is created by libvirt. It should not be necessary here

      # as it should be accepted by the conntrack rules in OUTPUT.

      #'default_out-qemu_dhcpv4':

      #  content => "oifname \"${interface}\" meta l4proto udp udp dport 68 accept";

    }

  }

  if $forward_traffic {

    nftables::rule {

      'default_fwd-qemu_oip_v4':

        content => "oifname \"${interface}\" ip daddr ${network_v4} ct state related,established accept";

      'default_fwd-qemu_iip_v4':

        content => "iifname \"${interface}\" ip saddr ${network_v4} accept";

    }

    if $network_v6 {

      nftables::rule {

        'default_fwd-qemu_oip_v6':

          content => "oifname \"${interface}\" ip6 daddr ${network_v6} ct state related,established accept";

        'default_fwd-qemu_iip_v6':

          content => "iifname \"${interface}\" ip6 saddr ${network_v6} accept";

      }

    }

  }

  if $internal_traffic {

    nftables::rule {

      'default_fwd-qemu_io_internal':

        content => "iifname \"${interface}\" oifname \"${interface}\" accept",

    }

  }

  # Libvirt rejects all the remaining forwarded traffic passing

  # through the virtual interface. This is not necessary here because

  # of the default policy in default_fwd.

  if $masquerade {

    nftables::rule {

      'POSTROUTING-qemu_ignore_multicast':

        table   => 'ip-nat',

        content => "ip saddr ${network_v4} ip daddr 224.0.0.0/24 return";

      'POSTROUTING-qemu_ignore_broadcast':

        table   => 'ip-nat',

        content => "ip saddr ${network_v4} ip daddr 255.255.255.255 return";

      'POSTROUTING-qemu_masq_tcp':

        table   => 'ip-nat',

        content => "meta l4proto tcp ip saddr ${network_v4} ip daddr != ${network_v4} masquerade to :1024-65535";

      'POSTROUTING-qemu_masq_udp':

        table   => 'ip-nat',

        content => "meta l4proto udp ip saddr ${network_v4} ip daddr != ${network_v4} masquerade to :1024-65535";

      'POSTROUTING-qemu_masq_ip':

        table   => 'ip-nat',

        content => "ip saddr ${network_v4} ip daddr != ${network_v4} masquerade";

    }

  }

}