Munin contributed plugins

#!/usr/bin/python

# Copyright (C) 2009-2012 Andreas Thienemann <andreas@bawue.net>

#

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU Library General Public License as published by

# the Free Software Foundation; version 2 only

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU Library General Public License for more details.

#

# You should have received a copy of the GNU Library General Public License

# along with this program; if not, write to the Free Software

# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

#

"""

=head1 NAME

snmp__areca_ - Munin plugin to get temperature, voltage or fan speed values

from Areca network enabled RAID controllers via SNMP.

=head1 APPLICABLE SYSTEMS

All machines with a SNMP capable ARECA raid controller.

=head1 CONFIGURATION

Make sure your Areca controller is accessible via SNMP from the munin host:

snmpwalk -v 1 -c snmp_community ip.add.re.ss

The plugin is a wildcard plugin and can thus be used to retrieve different

values depending on the name of the file.

Linking it as snmp_10.8.1.230_areca_fan would retrieve the fan speed values from

the Areca controller at 10.8.1.230.

Valid values are fan, temp and volt.

Add the following to your /etc/munin/plugin-conf.d/snmp__areca file:

 [snmp_ip.add.re.ss_*]

 community private

 version 1

Then test the plugin by calling the following commands:

munin-run snmp_10.8.1.230_areca_temp config

munin-run snmp_10.8.1.230_areca_temp

Both commands should output sensible data without failing.

=head1 INTERPRETATION

The plugin shows the temperature in Celsius or the fanspeed in rotations per minute.

=head1 MAGIC MARKERS

  #%# family=contrib

  #%# capabilities=

=head1 VERSION

0.0.1

=head1 BUGS

None known. If you know of any, please raise a ticket at https://trac.bawue.org/munin/wiki/areca__snmp_

=head1 AUTHOR

Andreas Thienemann <andreas@bawue.net>

=head1 LICENSE

GPLv2

=cut

"""

import pprint

import time

import sys

import re

import os

from pysnmp import v1, v2c, role, asn1

request_conf = {

	"volt" : {

		"label"  : "Voltages",

		"vlabel" : "Volt",

		"graph"  : "--base 1000 --logarithmic",

		"oid"    : ".1.3.6.1.4.1.18928.1.2.2.1.8"

	},

	"fan"  : {

		"label"  : "Fans",

		"vlabel" : "RPM",

		"graph"  : "--base 1000 -l 0",

		"oid"    : ".1.3.6.1.4.1.18928.1.2.2.1.9"

	},

	"temp" : {

		"label"  : "Temperatures",

		"vlabel" : "Celsius",

		"graph"  : "--base 1000 -l 0",

		"oid"   : ".1.3.6.1.4.1.18928.1.2.2.1.10"

	}

}

# Sanity check and parsing of the commandline

host = None

port = 161

request = None

try:

	match = re.search("^(?:|.*\/)snmp_([^_]+)_areca_(.+)$", sys.argv[0])

	host = match.group(1)

	request =  match.group(2)

	match = re.search("^([^:]+):(\d+)$", host)

	if match is not None:

		host = match.group(1)

		port = match.group(2)

except:

	pass

if host is None or request is None:

        print "# Error: Incorrect filename. Cannot parse host or request."

	sys.exit(1)

# Parse env variables

if os.getenv("community") is not None:

	community = os.getenv("community")

else:

	community = "public"

if os.getenv("version") is not None:

	version = os.getenv("version")

else:

	version = "1"

def get_data():

	# Fetch the data

	results = snmpwalk(request_conf[request]["oid"])

	# parse data

	vals = []

	for i in range(0, len(results)):

		idx, res = results[i][0].split(request_conf[request]["oid"])[1].split(".")[1:], results[i][1]

		if idx[1] == '1':

			vals.append([])

			vals[int(idx[2])-1].append(res)

		if idx[1] == '2':

			vals[int(idx[2])-1].append(res)

		if idx[1] == '3':

			if request == "volt":

				res = float(res)/1000

			vals[int(idx[2])-1].append(res)

	return vals

def snmpwalk(root):

	# Create SNMP manager object

	client = role.manager((host, port))

	# Create a SNMP request&response objects from protocol version

	# specific module.

	try:

		req = eval('v' + version).GETREQUEST()

		nextReq = eval('v' + version).GETNEXTREQUEST()

		rsp = eval('v' + version).GETRESPONSE()

	except (NameError, AttributeError):

		print '# Unsupported SNMP protocol version: %s\n%s' % (version, usage)

		sys.exit(-1)

	# Store tables headers

	head_oids = [root]

	encoded_oids = map(asn1.OBJECTID().encode, head_oids)

	result = [];

	while 1:

		# Encode OIDs, encode SNMP request message and try to send

		# it to SNMP agent and receive a response

		(answer, src) = client.send_and_receive(req.encode(community=community, encoded_oids=encoded_oids))

		# Decode SNMP response

		rsp.decode(answer)

		# Make sure response matches request (request IDs, communities, etc)

		if req != rsp:

			raise 'Unmatched response: %s vs %s' % (str(req), str(rsp))

		# Decode BER encoded Object IDs.

		oids = map(lambda x: x[0], map(asn1.OBJECTID().decode, rsp['encoded_oids']))

		# Decode BER encoded values associated with Object IDs.

		vals = map(lambda x: x[0](), map(asn1.decode, rsp['encoded_vals']))

		# Check for remote SNMP agent failure

		if rsp['error_status']:

 			# SNMP agent reports 'no such name' when walk is over

			if rsp['error_status'] == 2:

				# Switch over to GETNEXT req on error

				# XXX what if one of multiple vars fails?

				if not (req is nextReq):

					req = nextReq

					continue

				# One of the tables exceeded

				for l in oids, vals, head_oids:

					del l[rsp['error_index']-1]

			else:

				raise 'SNMP error #' + str(rsp['error_status']) + ' for OID #' + str(rsp['error_index'])

		# Exclude completed OIDs

		while 1:

			for idx in range(len(head_oids)):

				if not asn1.OBJECTID(head_oids[idx]).isaprefix(oids[idx]):

					# One of the tables exceeded

					for l in oids, vals, head_oids:

						del l[idx]

					break

			else:

				break

		if not head_oids:

			return result

		# Print out results

		for (oid, val) in map(None, oids, vals):

			result.append((oid, str(val)))

			# print oid + ' ---> ' + str(val)

		# BER encode next SNMP Object IDs to query

		encoded_oids = map(asn1.OBJECTID().encode, oids)

		# Update request object

		req['request_id'] = req['request_id'] + 1

		# Switch over GETNEXT PDU for if not done

		if not (req is nextReq):

			req = nextReq

	raise "error"

def print_config():

	print "graph_title " + request_conf[request]["label"]

	print "graph_vlabel " + request_conf[request]["vlabel"]

	print "graph_args " + request_conf[request]["graph"]

	print "graph_category sensors"

	print "host_name", host

	for dataset in get_data():

		if request == "volt":

			if dataset[1] == "Battery Status":

				continue

			else:

				print request + dataset[0] + ".label", dataset[1]

				ref_val = float(dataset[1].split()[-1][:-1])

				print request + dataset[0] + ".warning", str(ref_val * 0.95) + ":" + str(ref_val * 1.05)

				print request + dataset[0] + ".critical", str(ref_val * 0.80) + ":" + str(ref_val * 1.20)

		if request == "temp":

			print request + dataset[0] + ".label", dataset[1]

			if dataset[1].startswith("CPU"):

				print request + dataset[0] + ".warning", 55

				print request + dataset[0] + ".critical", 60

			if dataset[1].startswith("System"):

				print request + dataset[0] + ".warning", 40

				print request + dataset[0] + ".critical", 45

		if request == "fan":

			print request + dataset[0] + ".label", dataset[1]

			print request + dataset[0] + ".warning", 2400

			print request + dataset[0] + ".critical", 2000

	sys.exit(0)

if "config" in sys.argv[1:]:

	print_config()

elif "snmpconf" in sys.argv[1:]:

	print "require 1.3.6.1.4.1.18928.1.2.2.1.8.1.1"

	sys.exit(0)

else:

	for dataset in get_data():

		# Filter Battery Status (255 == Not installed)

		if request == "volt" and dataset[1] == "Battery Status":

			continue

		print request + dataset[0] + ".value", dataset[2]

	sys.exit(0)